Are fire suppression and fire sprinkler systems the same?

There has been long going misconception among people that fire sprinklers and fire suppression systems are the same. However, that’s not true.

Even most building owners won’t be able to tell the difference between fire sprinkler and fire suppression systems in Brooklyn.  If you are one of them, here are the major differences between the two you should know about.

Fire sprinkler systems - They are more commonly installed as compared to the fire suppression systems. Fire sprinklers usually rely on a steady supply of water to extinguish fires in the building.

How does fire sprinkler work?

The heat from a fire will cause the glass rod in the sprinkler heads to burst that releases pressure. As a result, the sprinkler system gets activated and sprays water over the concentrated fire flames. Depending on your building requirements, you can install any of the following types of sprinklers:

• Dry pipe
• Wet Pipe
• Pre-action
• Deluge

However, not all buildings are appropriate to install fire sprinkler systems. They may end up causing more harm than good. This is where fire suppression systems come in the picture. They are designed to protect your building against fire but without any need for water supply.

Let’s learn more about fire suppression systems

As mentioned earlier, fire suppression systems don’t depend on the supply of water to extinguish the fire. Instead they release foam or gas.

Whether you own a museum or a data center, you will have equipment and assets that can be destroyed or damaged with water but remain safe in the fire suppression methods.

The following are some of the examples of fire suppression systems:

FM200 - This is one of the most popular fire suppression systems as it is non-ozone depleting and safe to use in residential and commercial buildings.

CO2 - This system uses a high concentration of CO2 gas. It works by replacing the oxygen with CO2 in a room to extinguish the growing fire.

Besides these two, there are other fire suppression systems such as wet chemical and dry chemical. To get the best return on your investment, it is crucial to predict the future and anticipate fire emergencies.

If you’re considering to install fire suppression systems in Bronx,  it is advisable to rely on a trusted fire protection partner to prepare yourself for the next fire emergency. And they will be able to provide you with the best fire protection solutions.

How to choose the fire suppression systems for your building?

Installing fire suppression systems is an expensive affair, then why do people invest on such systems?

Indeed, installing these systems cost you some dollars but having fire suppression systems in Bronx installed can ensure the safety of your property as well as lives. In fact, it has been mandated by law to install regularly maintained and inspected fire suppression systems in all buildings whether commercial or residential.

A fire suppression system usually uses wet or dry chemicals to extinguish a fire. For example, if a fire starts in your building, it can be detected by the smoke or heat and a signal will reach to the control panel. This panel will send signal to the suppression system to release fire suppressant.

The following are the types of fire suppression systems that you can consider for your building.
Although there are various types of fire suppression systems, the type of fire suppression you choose for your settings depends on your building needs and the assets you want to protect. For example, commercial buildings have special hazards or are highly flammable. Hence, they require proper protection as they can catch fire very easily. However, whether you need fire suppression systems for your residential or commercial facility, here are the most common types.

CO2 fire suppression - It is a non-conductive form of a fire protection. In this type of fire suppression, a blanket of CO2 is released in the event of fire, which lowers the oxygen level to prevent combustion. The major advantage of using CO2 fire suppression is that the damage caused is minimal and you don’t have to do any clean up later that minimizes downtime. CO2 fire suppression systems are commonly seen in electric areas, engine rooms, liquid storage areas, and spray booths.

FM 200 fire suppression - FM 200 is a clean agent fire suppression system, which can act within seconds. Hence, quickly extinguishing the fire and preventing damages from the fire. The best thing about using FM 200 fire suppression is that it doesn’t leave any residue and is very safe. This type of fire suppressions are usually installed in museums, computer and control rooms, art galleries, and historical archives.

Foam fire suppression - Unlike other fire suppression systems, such as CO2 and FM 200, foam fire suppression system uses foam to cool a flame and suppresses it. The foam used in this system is made up of water, air, and foam concentrate. Foam fire suppression systems are ideal buildings that have anything flammable.

The bottom line

The fire suppression systems in Manhattan, New York, use wet or dry chemicals to extinguish fire, and they act quickly. Hence, whether residential or commercial building, it is essential to have a properly installed fire suppression systems to prevent fire. And depending on your building needs, you can choose the most suitable type of fire suppression system.

Are fire suppression and fire sprinkler systems the same?

 

There has been long going misconception among people that fire sprinklers and fire suppression systems are the same. However, that’s not true.

Even  most building owners won’t be able to tell the difference between fire sprinkler and fire suppression systems in Brooklyn. If you are one of them, here are the major differences between the two you should know about.

Fire sprinkler systems - They are more commonly installed as compared to the fire suppression systems. Fire sprinklers usually rely on a steady supply of water to extinguish fires in the building.

How does fire sprinkler work?

The heat from a fire will cause the glass rod in the sprinkler heads to burst that releases pressure. As a result, the sprinkler system gets activated and sprays water over the concentrated fire flames. 

Depending on your building requirements, you can install any of the following types of sprinklers:

• Dry pipe
• Wet Pipe
• Pre-action
• Deluge

However, not all buildings are appropriate to install fire sprinkler systems. They may end up causing more harm than good. This is where fire suppression systems come in the picture. They are designed to protect your building against fire but without any need for water supply. 

Let’s learn more about fire suppression systems
As mentioned earlier, fire suppression systems don’t depend on the supply of water to extinguish the fire. Instead they release foam or gas.
Whether you own a museum or a data center, you will have equipment and assets that can be destroyed or damaged with water but remain safe in the fire suppression methods. 

The following are some of the examples of fire suppression systems:

FM200 - This is one of the most popular fire suppression systems as it is non-ozone depleting and safe to use in residential and commercial buildings.
 

CO2 - This system uses a high concentration of CO2 gas. It works by replacing the oxygen with CO2 in a room to extinguish the growing fire.
 

Besides these two, there are other fire suppression systems such as wet chemical and dry chemical. To get the best return on your investment, it is crucial to predict the future and anticipate fire emergencies. 

If you’re considering to install fire suppression systems in Bronx, it is advisable to rely on a trusted fire protection partner to prepare yourself for the next fire emergency. And they will be able to provide you with the best fire protection solutions. 

Check out the latest advanced technologies used as Fire Suppression System

These days, the risk of fire in a building is very common due to heavy wiring and complex circuit designing. Keeping the fire suppression system is now an integral part of any building that is used by humans. Undoubtedly, the fire suppression system must be advanced enough to provide the best safety to human lives as well as property.

In this post, we have tried to cover some of the most advanced fire suppression systems in this post which you can look for your fire safety system. Below are the following technologies:

#1. First on our list are the sound wave fire extinguishers that take help of sound rather water or chemical to put of the fire. These are chemical-free, water free non-polluting extinguisher that uses sound waves to separate burning fuel from oxygen. Without oxygen the fire dies quickly, so soundwave helps to extinguish small fire very quickly.  This type of system helps to save your gallons of water that are used in the sprinkler system.      

#2. Water mist fire safety technology can be considered to be a major part of the future of firefighting techniques. They are not only an improvement on typical sprinkler systems but also save huge amounts of water. In this technique, instead of large water droplets, water mist systems send out a fine mist that smothers a fire. The larger surface area of droplets converts water to steam faster.
  
#3. ESFR also called as Early Suppression Fast Response Fire Sprinkler Systems are a standard fire suppression solution used in warehouses with high-piled inventory.

#4. Integrated Voice Evacuation and Messaging System: You can add this technology to protect people from fire. The integrated voice evacuation and messaging system alerts occupants with pre-recorded messages that helps the occupants to send a pre-record message when a fire breaks. Fire evacuation plans and other safety information plays over speakers so occupants can respond appropriately.

If you have been looking for your building best fire suppression system in Manhattan, NY then you can get in touch with William Hird & Co.

Fire Sprinklers vs. Fire Suppression: What’s the difference?

 

A common question that is asked by people in the fire protection world is about the difference between fire sprinkler systems and fire suppression systems. There are people who are not aware of the fact that fire sprinkler systems and fire suppression systems have huge differences and have different applications.

A fire sprinkler system uses water as an agent for extinguishing fire whereas fire suppression systems do not use water to extinguish fire. In spite of the dissimilarities, both fire sprinkler systems and fire suppression systems motive is to manage the fire or extinguish a fire.

To know more about the differences between both the systems, continue reading.

Fire Sprinkler Systems: Fire sprinkler systems are very effective at stopping fires. These systems are activated in cases where smoke or heat is detected. Additionally the fire sprinkler system will discharge water to extinguish fire in the area which is damaged.
 

There are various types of fire sprinkler systems. 

 

These consist of the following:

• Wet pipe systems
• Dry pipe systems
• Pre-action systems
• Deluge sprinklers systems

 These systems are commonly utilized form of fire protection, although there are cases where fire sprinkler systems may not work. In such cases fire suppression systems are installed.

Fire Suppression Systems: Fire suppression systems are used in situations where special articles are present such as museums, art galleries, etc. These systems respond very fast and extinguish fire immediately causing less damage to the articles. There are different types of fire suppression systems. 

 

These consist of the following:

• FM200 systems
• CO2 systems
• Wet chemical systems
• Dry chemical systems

Each fire suppression system is designed based on special articles that require protection. You must consider a lot of factors before deciding which system is right for you. The code of your building or workplace will help you in identifying the type of system you will require. In cases where you need to install a fire suppression system or a fire sprinkler system, you can get in touch with professionals to find out which type of system is right for your building and workplace.

Most of the people out there  tend to ignore the fire systems as a part of their workplace or buildings. Do your research and understand why they are important.

Are you looking for Fire suppression systems in Manhattan? Get in touch with William Hird & Co. For further details call (718) 499-4881

What Is A Fire Suppression System & What Are Its Types?

Fire can be the most hazardous form of mishap that can take place on a property. Having a fire suppression system installed in the vicinity is very crucial to protect the interests of the employed workforce. 

A fire suppression system can be defined as an equipment engineered to curb and extinguish an accidental fire. A fire suppression system consists of dry as well as wet components that aid in extinguishing sudden fire breakouts.

 

A wide variety of fire suppression systems consist of inbuilt fire detectors that signal the workers on the property. As soon as fire detectors get activated, the fire suppression system starts functioning automatically however, various fire suppression systems might require manual activation. 

The origin of the fire breakout plays a significant role in determining the appropriate measure required to curb the fire. Taking an example, if the location comprises of situations that may lead to explosive hazards due to accident fire, such places require specialized fire suppression systems installed. 

Types
Fire suppression systems have evolved over time. Nowadays, automated fire suppression systems are in great demand as they are the ideal choice for commercial and public industrial buildings. 

Below mentioned are the most commonly used fire suppression systems:

Gas Suppression System: Gas suppression systems are mostly used in small surroundings such as small office spaces, data cabins, and electric switch boardrooms. These contain liquid nitrogen and are stored in a liquid form. The component of nitrogen is used to maintain the pressure. When it comes in contact with fire, the FM200 chemical becomes reactive and helps in extinguishing the fire by suppressing it.

Chemical Foam Suppression System: Chemical foam suppression system is ideal for preventing an accidental fire in a commercial kitchen. Chemicals like potassium carbonate are used in these fire suppression systems. A chemical foam suppression system works by placing the system nozzle under the cooking equipment, a water-based agent is then pushed inside with a chemical foam.

Water Sprinkler Suppression System: Water sprinkler suppression system is the most commonly used method of extinguishing a fire. These systems can be operated both, automatically as well as manually. 

In case of a fire breakout, the sensors installed in the water sprinkler suppression system get triggered and start to function automatically. If the suppression system does not activate automatically, it can be switched on manually as well.

Reaction Tube Suppression System: A reaction tube suppression system is equipped with a valve, a tube, and an agent. The reaction tube detects an accidental fire on coming in proximity to heat or smoke.

A reaction tube suppression system is mostly used in automobiles and electrical cabinets. As soon as the temperature rises due to fire, the reaction tube builds air pressure and drops chemical agents over the fire in order to extinguish it. 

Wish to safeguard your property from accidental fires? Get a fire suppression system installed today! Call us or visit www.hirdco.com